Book a demo

Measurement capabilities

Convert industrial signals into values people can use

EMIKO scales supported transmitter signals into the engineering units used by your operation, applies configured thresholds and records the values for history, alerts and export.

Explore data and metering

From raw signal to a named measurement

The controller accepts the configured signal from the transmitter and converts it into the correct operating range. Instead of seeing a channel number or raw current, the user sees a named value such as water level, temperature, wind speed or active power.

SIGNAL FROM THE TRANSMITTER 4 8 12 16 20 mA SCALED TO AN ENGINEERING RANGE 0 25 50 75 100 °C SETPOINT 80 HYSTERESIS Filter and damping STEADIES A NOISY SIGNAL Alarm and text NAMED, NOT A CODE DataGuard HISTORY AND EXPORT ACCEPTED SIGNAL TYPES 4-20 mA 0-20 mA 0-5 V 0-10 V 0-30 V 0-30 V to 0-10 V

Filtering, damping and hysteresis avoid misleading fluctuations and repeated alerts at the threshold.

Input

Connect a supported transmitter signal to the configured channel.

Scale

Convert the electrical signal into the required engineering range and unit.

Stabilise

Apply appropriate filtering, damping and hysteresis to avoid misleading fluctuations or repeated alerts at the threshold.

Interpret

Give the measurement and alarm a clear name that the recipient can understand.

Record

Make the value available for history, reporting, warning and export where configured.

Supported analogue signal types

The controller supports up to 32 analogue channels, subject to the selected configuration and installed expansion equipment.

  • 4 to 20 mA
  • 0 to 20 mA
  • 0 to 5 V
  • 0 to 10 V
  • 0 to 30 V
  • 0 to 30 V converted to 0 to 10 V

Measurement catalogue

The final availability and configuration must be confirmed for each installation.

Climate and weather

Temperature Pressure Humidity Wind speed, 10-minute mean Wind gust, 10-minute Wind direction, current Precipitation or interval precipitation Solar radiation Illuminance UV radiation Dew point Wet-bulb temperature Heat index or apparent temperature Wind chill Visibility Cloud cover Wind direction, 10-minute circular mean Wind direction spread, 10-minute Wind direction, 2-minute circular mean Wind direction spread, 2-minute Wind speed, 2-minute mean Wind gust, 2-minute

Water and water quality

Water level relative to DVR90 Water flow speed Water flow direction Flow rate Volume for water or heat Conductivity pH Salinity Turbidity Chlorine Oxygen ORP TDS Ammonium or ammonia Nitrate Phosphate Chlorophyll-a BGA or phycocyanin Oil in water Water level relative to DKLAT or LAT Measured water-surface activity from the water-level filter

Energy and power quality

Voltage Current Active power (P) Active energy Reactive energy Frequency Total harmonic distortion (THD) Reactive power (Q) Apparent power (S) Power factor Imported energy Exported energy

Counters and operating time

Operating-time or on-time counter Pulse counter

Multiple temperature points

Sensors on the supported 1-Wire bus can provide temperature measurement and individual alarm handling independently of the analogue channels.

Typical applications include livestock buildings, technical and plant rooms, storage areas and cold rooms, basins, tanks and wells, and pipe systems and distribution sections.

Digital inputs, counters and expansion

Digital inputs can record equipment state and support pulse or operating-time counters. Where the built-in channels are insufficient, supported I/O expansion modules can add channels to the approved RS485 configuration.

Confirm the installation before specification

Bring the transmitter type, signal range, required engineering unit, alarm logic and intended reporting use. Vikingegaarden will confirm the channel configuration, scaling and information available in EMIKO.

Book a demo